How to Restore Mac Stuck on Loading Screen – Here are 6 Easy Methods

Part 1: 6 Methods to Fix Mac Stuck on Loading Screen

Method 1: Disconnect All Peripherals

Before restarting your Mac, you can simply disconnect all peripherals. If there is a malfunctioning peripheral, it will fail to start your Mac and stuck on loading screen for a long period.

Step 1: Turn your MacBook off with the Power button and remove the entire peripheral devices. After that, you can restart your Mac to find out whether it can fix the problem for Mac stuck on the loading bar.

Step 2: When you need to locate the problem for the detailed peripheral, you can update the drives and connect each device to the MacBook. Just have a backup of the content before further editing.

Method 2: Reboot into Safe Mode

Safe Mode is another efficient method to resolve most boot issues, including Mac stuck on the loading screen. If your Mac won’t load into macOS, it should be another easy choice you should use.

Step 1: Hold and press the Shift button and the Power button for more than 10 seconds. Once you have found the loading screen, you can release the Shift key to enter Safe Mode.

Step 2: Make sure the Safe Mode option is selected in the Software menu and you can confirm the task. After that, you can restart your Mac to fix the Mac stuck on the loading screen.

Method 3: Reset Mac SMC

When you need to reset the System Management Controller to fix Mac stuck on the loading bar for Intel-based Macs, it is an in-depth troubleshooting method to get rid of the related problem easily.

Step 1: Press the Power button to turn off your MacBook. After that, press the Shift + Control + Options keys at the same time for 10 seconds for fixing the related problem for Mac stuck on the loading screen.

Step 2: Release all of the above keys at the same time to get everything back to normal again. After that, you can press the Power button again to start the Mac for a second time.

Method 4: Reset Mac NVRAM/PRAM

It is another method that works for Intel Mac, which enables you to see and reset the information, such as recent kernel panic and disk selection in the PVRAM/NVRAM when your Mac is stuck on the loading bar.

Step 1: Shut down your Mac with the Power button. When you power your Mac back up, you can press and hold the Command + Options + P + R keys simultaneously for 10-15 seconds.

Step 2: When you hear a startup sound or the popup Apple logo, release all the keys to get rid of Mac stuck on a loading screen. Go back to the System Preferences option to set anything as usual.

Method 5: Reboot into Recovery Mode

Just like the name of Recovery Mode, it enables you to recover the hard drive from any errors with the Erase option in Disk Utility, including the Mac stuck on the loading bar issue in no time.

Step 1: Switch on your Mac with the Power button. As soon as turning on the Mac, you can simply press and hold Command + R keys until you find the pop-up Apple logo or a spinning globe.

Step 2: Select the Disk Utility option and click the Continue button within the macOS utility window. Select the Mac hard drive and choose the Erase button to erase the content of your MacBook.

Step 3: Choose APFS and Scheme to GUID Partition Map from the Format option. After that, you can click the Erase button before starting your Mac to restore everything to normal.

Note: It is a method that works for the Intel Mac only. When you are using M1 or M2 Macs, you can follow a similar process with the Options button.

Method 6: Reboot in Single User Mode

When your macOS Ventura installation is stuck at the progress bar, you can enter Single User Mode to resolve the problems for administrative tasks and troubleshooting purposes in the following steps.

Step 1: Boot up your Mac with the Power button. Press the Command + S keys together as soon as the boot process begins. Keep holding the keys until you see white text on a black background.

Step 2: Enter the admin password to get into Single User Mode to run repairs on your boot disk. Of course, you have to get familiar with the fsck command after booting in the safe mode.